I run SkySafari 6 Pro on my iPad Pro. Device shows connectivity to the SkyFi wireless connector in the iPad wifi settings. However, in the SkyFi wireless setup page, it only periodically shows connection and that is only when I power on the device. Then I go to the scope to connect and I get the error message "Connection Failure. SkySafri 6 Pro cannot make a wireless network connection to the scope. Make sure you've joined its Wi-Fi network, and entered its IP address correctly. " After the error, the SkyFi network still appears on my iPad Pro wireless settings, but no longer in the setup in the app itself. I have wired the scope to my laptop, it that works fine. My scope is a Meade LX200 GPS SMT. Running firmware 1.3.3. Any thoughts?
SkySafari 6 Pro | Meade LX200 vs SkyFi Connection Failure