1. Simulation Curriculum Corp.
  2. Community
  3. SkySafari | iOptron Telescopes
New post
0

How Come Skysafari Pro Can Make A Wireless Connection To The Scope, But The Scope (CEM40 + StarFi) Is Not Responding? (Answer: Choose ScopeType CEM120 - Read On!)

I recently acquired an ioptron CEM 40 with a iStarFi wi fi connector. I then purchased SkySafari 6 Pro on the Apple App Store and run it on my iPad and iPhone, both with updated firmware. 
Below is my SkySafari set up page (pardon my French!). I get the following error message: Skysafari Pro can make a wireless connection to the scope, but the scope is not responding. I updated the CEM 40 and hand controller firmwares with no success. I contacted ioptron and sent the same information contained in this post but radio silence since. My vendor also contacted ioptron who answered that both iStarFi connector cables should be used but there is only one cable that goes to the iPort jack.
Can anybody offer guidance? Merci

Date Votes

4 comments

  • 0
    Avatar
    Keiron Smith

    Jaques, 

    Please read through other posts in our community forum like this one here:

    Why Will SkySafari 6 Plus On Android Not Connect To iOptron's StarFi With An CEM40? (Answer: Update To The Latest Version Of SkySafari)

    Ask a CEM40 user who has posted about success using SkySafari to assist you with your configuration.

    We do not have an iOptron CEM40 in house for testing.

    And, this is a technical issue that should be supported by iOptron, since it is iOptron that brought StarFi to market claiming support via SkySafari.  So, persist with them for a resolution, and please post your success story here in the end.

    Thanks!

  • 0
    Avatar
    Jacques Jolivet

    Thank you for your response. I will recontact Ioptron. Could this issue be addressed by a SkySafari update?

  • 0
    Avatar
    Jacques Jolivet

    Ioptron responded promptly after I mentioned that I had posted this issue on your site. They had me change the mount selection to CEM120 from CEM/iEQ Pro/AZ (as per their online manual). Problem solved. I hope this helps others who encounter the same problem and that they upgrade their manual soon as I spent an inordinate amount of time trying to solve this issue. Merci

  • 0
    Avatar
    Keiron Smith

    An excellent result, Jacques!  Thanks for posting the follow up solution here.

    Clear skies and stay safe!

Please sign in to leave a comment.