Current Scope Settings:
(Pixel 3l is connected to Scope's WiFi Network via Synscan WiFi Adapter plugged into mount)
Open SkySafari Pro 6
Scope Type: Skywatcher SynScan
Mount Type - Equatorial GoTo (German)
Connect via WiFi
IP Address: 192.168.4.2
Port Number : 11880
Go to Home Screen
Message: Connection Failure - Sky Safari Pro can't make a wireless connection to the scope.
If you are using bluetooth...
If you are using Wi-Fi, make sure you've joined the scope's W-Fi network, and entered it's IP Address correctly.
Note: IP Address obtained from Network details from WiFi settings on Pixel 3L.
IP Address 192.168.4.2
Subnet mask 255.255.255.0
Port Number came from Instruction Manual
I would appreciate any advice.