I have a new Celestron 8SE, hand controller version; HC:NXS 5.31.9102 and MC:5.14 5.14.
After connecting my Ipad to the SkyFI 3 wifi. I went into settings in SkySafari Pro and selected my scope, Celestron Nexstar GPS/SL/SE. and mount type Alt-Az Go To. After I went and aligned my scope using the StarAlign method (3 bright stars) after confirmation I attached the SkyFi with a USB-A cable on the SkyFi to the bottom of the Nexstar Hand controller with a USB mini B connector. I then powered the SkyFi on. I then fired up SkySafari Pro and hit the connect button and received the following message... Connection Failure SkySafari Pro can make a wireless connection to the scope, but the scope is not responding. Make sure the scope is powered on an connection correctly. Also make sure you selected the correct scope type.
Please advise what to do. Thanks