New post


I have Enthusiast 7.3.0 I am having trouble setting the local time. My computer time is correct but SN is showing sunrises and the the like at 8.31pm. When I change the time on the top bar, it seems to be 12 hours out, day is night and vice versa. When I change the time to say now at 9:03pm, the program shows it to be day light at my viewing location, which is the Gold Coast on the north east coast Australia

I have used the program on other occasions without trouble.

Your assistance will be appreciated.    Gary Brown

<email removed by admin> to save you from getting spammed.


1 comment

  • 0
    Sophie Cheng

    Hello Gary,

    Starry Night time is based on your computer operating system time. The two must be set correctly, and in sync. An error in either will result in a Starry Night error in calculation. For the moment, let us assume your operating system clock is set correctly. So, lets look at Starry Night.

    If you go to File--->Set Home Location--->and then look at the "Map" tab, you will probably see that there is a little red "X" (which represents your location on the global map) somewhere in middle of the Atlantic Ocean or India or somewhere else. The little red "X" needs to be where you are actually located (as a timezone). It doesn't have to be on your exact city, but in the same general vicinity. Once the "X" has been located properly, your Starry Night time should read correctly. Please have a look at this, and let me know whether this resolves the issue for you.

    In Starry Night please check the following:

    1. Go to File ---> Set Home Location ---> Choose your city from the "List" tab or by entering your zip code on the "Zip/Postal Code" tab.
    2. Go to the Map tab and make sure the X is position in the general vicinity. So long as the X is positioned just about right, that ok.
    3. Go to the "Latitude/Longitude" tab and confirm that your "Time Zone" is set correctly. Check the option for "Automatic".
    4. Go to the "Latitude/Longitude" tab and confirm that DST is set correctly.
    5. Go to the Starry Night Time & Date functions (top-left of application window) and makes sure that DST is set correctly.

    On your computer please do the following:

    1. Go to your operating system clock and choose the option to make changes.
    2. Confirm that you are, in fact, correctly set for your time zone.
    3. Confirm the clock time & date are correct.

    ***If all of the above are true it is not possible for Starry Night to give you an incorrect time.***

    So, please spend a few minutes going over all the details above and verify that everything is set up correctly. If Starry Night is not giving you the correct time then something in the list above in not set properly.

    If you need additional assistance, please submit a ticket here:



Please sign in to leave a comment.