0

How To Connect Huawei P30 Pro Running EMUI 10 OS + SkySafari 6 Pro + Skywatcher AZGTi (Answer: Read On!)

Art F

February 08, 2020 22:16

Answered

Follow

Hi Bill I'm still having no luck controlling my skywatcher azgti mount with 6pro. All of the references on here are about using SF5 Pro. Is this ever going to be possible? I have purchased every pro version of SF released since version 2 but this may be the last.

• Facebook
• Twitter
• LinkedIn

3 comments

• 0
  
  Keiron Smith February 10, 2020 17:00

  Hi Art, 

  If you want assistance you will have to provide a lot more info.  There are many SkySafari + SkyWatcher success stories posted in the community forums.

  Please explain in sufficient detail what hardware and software composes your current setup, the configurations you have tried, the error messages received.

  Thanks!

• 0
  
  Art F February 10, 2020 18:06

  Thanks.
  I'm using Sky Safari 6.6.4.10
  Huawei p30 pro running EMUI 10
  The Azgti WiFi connects to my phone and the synscan app connects to it and controls the mount.
  Sky safari does not have a WiFi option for this mount.
  The advice is to have both apps running to connect using sky safari but this doesn't seem to work.
  Could you look into supporting this mounts WiFi directly.

• 0
  
  Keiron Smith February 10, 2020 18:28

  Hi Art, 

  Please see this community discussion:

  Why Do I Get A Connection Failure Error Using SkySafari 6 Pro On iOS And The SkyWatcher SynScan WiFi Module? (Answer: Open SkySafari On The 1st iOS Device And Enter The IP Address Of The 2nd iOS Device, Not The IP Address Of The Mount - Enter Port 11882)

  And, please review the other discussions in the SkySafari + SkyWatcher community forum here:

  SkySafari | SkyWatcher Telescopes

  Unless the connection is not possible because of the EMUI 10 OS then I think your solution is somewhere here close at hand.

  Thanks!