With the following equipment and settings listed below, I can align the scope using Synscan Pro with no issues, but get the Connection Error "SkySafari 6 Plus can make a wireless network connection to the scope, but the scope is not responding. Make sure it is connected and power on. Also check that you scope type is correct." I have cycled power on the iPad, stopped all applications and have reinstalled SkySafari Plus 6.
IPad MH182LL/A (13.4.1)
Synscan Pro (1.19.0)
SkySafari Plus 6.7.1.2
Az-GTi Mount (Alt Azimuth Mode)
Settings:
Scope Type: Skywatcher Synscan
Mount Type: Alt-Az Goto
IP Address 192.168.4.2
Port Number 11882